Cool on Track® Canine Cooling Coat 2.0

Cool on Track® Canine Cooling Coat 2.0

The Cool on Track® Canine Cooling Coats 2.0 from Back on Track® are made with breathable mesh material, are designed to cool the largest portion of your dog’s body, notably for breeds with thinner fur. In the 2.0, the cooling material covers both sides and the spine area is mesh only (to improve efficacy). The fabric absorbs a large amount of water, which then evaporates through the outer layer. No chemicals are used, and no freezer is required. The cooling effect lasts as long as the material remains damp, and it can easily be reactivated by soaking it again.

The Cool on Track® Dog Coat 2.0 helps reduce the surface temperature by up to 6°C with three simple steps:

• Soak the coat in water.
• Squeeze out the excess.
• Put the coat on your dog.

The coat fastens securely with wide hook-and-loop straps, ensuring it stays in place even during active play or exercise. Designed especially for breeds with thin fur, the cooling material targets the sides of the body, while the spine is covered only with mesh for breathability. 

Sizes: (back length, withers to tail)
25cm, 30cm, 40cm, 50cm, 60cm and 70cm 

 Colours: Blue

 Prices:

 £18.50 each (25cm)
 £19.50  each (30cm)
£24.85 each (40cm)
£29.20  each (50cm)
£34.60  each (60cm)
£38.90  each (70cm) 

Please note: This product is available on a preorder basis. We do not currently hold stock; each coat will be ordered directly once you place your order.

NB: It is important that Cool on Track® Cooling Coats, Mats, Bandanas and Bell Boots are kept moist even when not in use. If dry, the cooling fabric becomes sensitive and could crack, peel or damage the inner lining. To restore a dry product, fully rinse it with lukewarm water. If the product is dry and folded (especially from new), ensure that it is totally wetted before slowly & carefully unfolding it & gently parting any sections that may be stuck together (applying more water, if necessary). 

To launder and refresh the Cooling Coat, hand wash in moderately warm water (max. 30°C) with sparing use of mild, liquid detergent (without bleach or fabric softener). Close the coat, attach the hook & loop fastenings and allow to dry flat and naturally (do not tumble dry) and, once dry, do not fold. If the coat is to be worn regularly, keep it moist in a sealed plastic bag (squeeze out as much air as possible before sealing the bag), but for longer term storage, let the coat dry out beforehand, then soak it before use. Also, with genuine Cool on Track® Cooling Coats, there will be a small, white tab sewn into the inner hem (at the front end of the jacket) with the manufacturer’s instructions.

(Product Code: 432703**)